Designed by Acik Mardhiyanti; photographed by Acik Mardhiyanti
It is a pretty flower brooch, right? What do you think? In this article, I am going to share with you how to create it. Moreover, I will guide you step by step and make sure easy following too. Go get your materials, and starting to practice. I believe you can do it!
Materials:
- a needle
- sewing thread
- a silver leaf
- artificial berry or flower stamen
- light blue satin ribbon with 2,5 cm for the width
- dark blue dark satin ribbon with 2,5 cm for the width
- 1 pin brooch with 3 cm for the size
- felt
- ruler
- Gun glue
These are what you do:
- Cut dark blue satin ribbon with a length of 7 cm. You need 6 pieces
- Cut light blue satin ribbon with a length of 6 cm. You need 8 pieces
Photographed by Acik Mardhiyanti
- Cut light blue satin ribbon with a length of 5 cm. You need 3 pieces
- Burn the right and left edges with a lighter
- Prepare the sewing thread and a needle
- First, take light blue satin ribbon with 5 cm for the length
- Pulling from the right side to the left until both sides met
- Starting sewing from the right side, join them
Photographed by Acik Mardhiyanti
- Pulling the thread slowly, join two sides and secure it
Photographed by Acik Mardhiyanti
- Secondly, take 3 pieces the light blue satin ribbon with 6 cm for the length. Doing the same step but after pulling the thread you do not need to join two sides, just secure it.
Photographed by Acik Mardhiyanti
- Thirdly, take 5 pieces the light blue satin ribbon with 6 cm for the length and doing the same steps
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Now, take 6 pieces the dark blue satin ribbon. Do the same steps as others but you sewing each one of them. You do not need to join the petals
Photographed by Acik Mardhiyanti
- All the petals are ready!
Photographed by Acik Mardhiyanti
- Prepare the artificial berry or flower stamen. I choose the silver color
Photographed by Acik Mardhiyanti
- Apply the glue in the bottom of the artificial berry or under the green leaves. Put in the artificial berry in the hole. Cutting the stalk
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Applying the glue on the second petal that has 6 cm for the length. Join it with the center of the flower
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Applying the glue on the other petal that has 6 cm for the length. Join to the center of the flower
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Now, apply the glue to all the dark blue satin ribbon petals. Joining them to the flower
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Prepare the silver leaf. Cutting the stalk; applying the glue; join it to the flower
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Prepare the felt. Cut round the felt with 3 cm for diameter
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Prepare a needle, sewing thread, and a pin brooch. Attaching the pin brooch on the felt by sewing it
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
- Applying the glue on the other side of the felt
Photographed by Acik Mardhiyanti
- Now attaching the felt with the flower
Photographed by Acik Mardhiyanti
- If you have a "HANDMADE" label, you can place it on the pin brooch by gluing it
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
Photographed by Acik Mardhiyanti
The steps are easy, right? I am sure you will master it. Furthermore, you can find the opportunity in it by selling this work to your friends. Thank you for reading my article and bye for now!
Note:
- Written by Acik Mardhiyanti
- Photographed by Acik Mardhiyanti
- Do not copy this article without permissions
- Do not reuse these photographs anywhere else without permissions
No comments:
Post a Comment